Welcome Guest [Log In] [Register]
clubae111.com is the largest community forum of English speaking AE111 owners on the internet today with over 2000 members plus a wealth of information and resources relating to the AE111 chassis and 4A-GE engines.

Join our community today!

If you're already a member please log in to your account to access all of our features:

Username:   Password:
Add Reply
Oil Press
Topic Started: Oct 21 2009, 09:38 AM (123 Views)
BZR_NZ
Stage 1
hey guys i have a problem with my oil press gauge i can’t find where a bout’s to fit the oil sender unit to on the block ? any information would be awesome , a few pictures would be great ;)
Offline Profile Quote Post Goto Top
 
JASE
Member Avatar
Stage 6
You need a sandwich plate to attatch where your oil filter is mate it has the connector s on it , to fir the gauges get a two port hole one and you can add oil temp as well

sandwich plates are readly available on ebay
Offline Profile Quote Post Goto Top
 
1i1
Member Avatar
NZ Toyota Parts Guy

That or people use a tee piece off the same point as the stock oil pressure switch. But sandwich plate is probably easier and then you can also rum temp gauge B)
Offline Profile Quote Post Goto Top
 
BZR_NZ
Stage 1
sweet cheers guys like this one here ? http://www.omins.info/jonvy/line/981/jonvy82-sender-attachment-for-oil-temp-pressure/
Offline Profile Quote Post Goto Top
 
1i1
Member Avatar
NZ Toyota Parts Guy

Spot on.

Just make sure its the same thread etc as the sendors for your gauges. Most are 1/8 tappered thread. Use some thread tape and you'll be away laughing.
Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
« Previous Topic · Interior · Next Topic »
Add Reply