Welcome Guest [Log In] [Register]
Welcome to Redanimeland.forum - The Great Place for Endless Discussion and fun!!. We hope you enjoy your visit.


You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use such as the chat room, the arcade, the blog and many more . If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free. Join our community today, right now!


Join our community!


If you're already a member please log in to your account to access all of our features:

Username:   Password:
Add Reply
Operating principle of pump
Topic Started: Oct 25 2017, 03:13 AM (4 Views)
meishengchao
Hokage
[ *  *  *  *  *  *  *  *  * ]
{The impeller is mounted in the pump shell and is fastened to the pump shaft. The pump shaft is driven directly by the motor. The pump shell has a liquid straw in the center. The liquid through the bottom valve and the suction pipe into the pump. The liquid outlet on the pump case is connected with the discharge pipe.Carburizing Carbonitriding Nitriding Furnace
The pump is filled with the liquid being pumped before the pump starts; After start-up, the impeller is driven by the shaft, and the liquid between the blades must also rotate. Under the action of centrifugal force, the liquid is thrown from the center of the impeller to the outer edge and obtained the energy to enter the shell of the volute pump at high speed from the outer edge of the impeller. In the volute, the liquid decelerates due to the gradual expansion of the flow path, and then turns some kinetic energy into static pressure energy, and finally, the higher pressure flows into the discharge pipe and sends it to the need place. When the liquid flows from the center of the impeller to the outer edge, a certain vacuum is formed in the center of the impeller. The pressure on the liquid surface of the tank is greater than the pressure of the entrance of the pump, and the liquid is continuously pressed into the impeller. Thus, as long as the impeller turns, the liquid will continuously be inhaled and expelled.vacuum sintering furnaceRotary furnace
The working principle of the linear pump is different from that of any other pump, which is the principle of magnetic levitation and the structure of the spiral circulation physical structure to realize the transfer of the fluid, namely, cancel the shaft, cancel the shaft connection, and cancel the shaft seal structure. After starting, the current is transformed into a magnetic field, which drives the spiral ring, which means that the spiral ring improves the flow.
Vacuum Tungsten and Molybdenum sintering furnace 5-500KG

Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
« Previous Topic · Introduce · Next Topic »
Add Reply

.Wiredvage Theme created by Zeus00 and converted by Wolt of the ZetaBoards Theme Zone