Welcome Guest [Log In] [Register]
Welcome to Redanimeland.forum - The Great Place for Endless Discussion and fun!!. We hope you enjoy your visit.


You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use such as the chat room, the arcade, the blog and many more . If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free. Join our community today, right now!


Join our community!


If you're already a member please log in to your account to access all of our features:

Username:   Password:
Add Reply
Temperature measurement system
Topic Started: Jan 11 2018, 02:52 AM (6 Views)
meishengchao
Hokage
[ *  *  *  *  *  *  *  *  * ]
{Temperature measurement error caused by unequal material of 1. thermocouple
The annealing method can not be completely eliminated. Filial piety is the error of the system error, but its size cannot be estimated considering the dividing error of thermocouple in general incorporation.
Dividing error of 2. thermocouples
The difference between the thermoelectric characteristics of a thermocouple and the uniform dividing table is often given a limit range. For example, platinum platinum rhodium thermocouple more than 600 DEG C, the allowable error range for the measured temperature of + 0.5% (more than 3 DEG C). The error belongs to the system error, and the thermocouple is checked regularly, and the check error can be considered only.
3. the temperature measurement error caused by different thermoelectric characteristics of the compensating wire and the thermocouple
The error value is small and can be ignored. For example: cold forging Platinum Rhodium Platinum thermocouple is lower than 100 DEG C, the error value is only + 0.03 DEG C.
Temperature measurement error caused by the installation position of 4. thermocouple
When the temperature gradient is large, the thermal end of the thermocouple should be accurately located at the temperature point to be measured. Otherwise, it will cause a larger temperature measurement error.
Compensation error of 5. cold end temperature t0
When the mechanical zeroadjustment method is adopted, the mechanical zeros should be adjusted to E (T0, 0), which includes t0's test error, instrument adjustment and indication error, and the error caused by t0's continuous change. This error is larger and is troublesome.��ݧѧ��ڧܧ�ӧ�� �ӧѧܧ��ާߧ�� ���ܧ���ڧ� �ާѧ�ڧߧ�
The cold end temperature (t0 = 0) or bridge compensation compensation, there is a nonlinear error within the range of the cold end temperature. Using the temperature control system, this error can be basically eliminated.
6. display error of display instrument
It is determined by the accuracy of the display instrument.���ѧܧ��� �էӧ֧�ߧ�� ����ܧ� ����ާڧ��ӧѧߧߧ�� ���ܧ���ڧ� �ާѧ�ڧߧ�
The error caused by the resistance value of the 7. line
There is a strict requirement for the total resistance value of the moving coil instrument. When the value of the R line is deviate or changes with time, it will cause the temperature measurement error.
8. the error caused by the output of the components of the automatic temperature control system and the error caused by the feedback time
���ѧܧ��� �ߧѧ�ݧѧӧ� �ާѧ�ڧߧ�
Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
« Previous Topic · Introduce · Next Topic »
Add Reply

.Wiredvage Theme created by Zeus00 and converted by Wolt of the ZetaBoards Theme Zone