CLICK HERE to see posts in last 24 hours
| Welcome to Mainly Military modelling. We hope you enjoy your visit. You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free. Join our community! If you're already a member please log in to your account to access all of our features: |
| Junkers Ju 510 (Daylight Raid Interceptor) | |
|---|---|
| Tweet Topic Started: Feb 26 2011, 12:03 PM (489 Views) | |
| tc2324 | Feb 26 2011, 12:03 PM Post #1 |
|
LCDR Tony `Banana's` Clay
|
So here is where I`m at with this major kitbash/scratchbuild for a `1946` GB on another forum. It started when I was having a rumage through my spares box today when the makings of a `Lufty 46` design took hold. So I thought I`d post the progress so far on my vision that is the Junkers Ju 510. Said spares box and the few bits that inspired me. While the main sections are mainly 1/72, the finished build will be 1/48. ![]() ![]() So how is this thing going to take off then and whats providing the power...?? Well it`s going to operate in the same way as the Me 163. Bolt on and `throw away` main u/c with a skid to land on. Take off powerplant is a rocket engine in the tail. (u/c is from a 1/48 P-38 and jet exhaust is from a 1/72 Jet Provost) ![]() Next job, build a cockpit floor, and general cockpit area as the 1/72 Airfix Focke Wulf 154 kit is so bad. Cut the tail into the desired shape for the `rocket` exhaust and then stick it all together. ![]() ![]() Next step, get a 1/72 Buccaneer bomb bay, cut and trim to fit and that should sort out where the rocket fuel tank will go....... ![]() ![]() Next up was the landing ski. Got myself a decent bit of sprue like this..... ![]() ...... and after what seemed forever with the file, got it to look like this........... ![]() Just need to work it a bit more and then add the struts. Next was the booster rocket pack to help this Junkers take off. Used a couple of SNEB rocket pods for this. Lobbed off the front sections and added caps to the front which will house the parachutes once these are jettisoned after take off. ![]() And while that lot was drying out I started the tedious task of filling in the gaps and filing them down. ![]() |
![]() |
|
| Deleted User | Feb 26 2011, 02:39 PM Post #2 |
|
Deleted User
|
Im intrigued tc, I cant quite see what it is exactly going to look like just yet but thats why I dont do kit bashing (ive got no imagination for this sort of thing :lol:) I look forward to seeing how it pans out
|
|
|
| tc2324 | Feb 26 2011, 10:03 PM Post #3 |
|
LCDR Tony `Banana's` Clay
|
Hope I don`t let you down Shaun.... :lol: So today while I`m waiting for a second application of filler to dry I started thinking about the backstory and why this aircraft may have been built. So lets imagine that the Ardennes offensive was a success and the germans have managed to halt the western advance and even push them back a bit. The year is now 1946 and in January Junkers start getting the Junkers 510 to the Luftwaffe in reasonable numbers. Now the allies still have control of the air, so that means airfields are a bit sparce, and the germans need to transport and launch the Junkers from any straight bit of road they can find. My solution is to have the aircraft sitting on a trolley, for want of a better word, which is used to transport the fighter around and is then used in the launch itself. Once airbourne the trolley is released and comes floating to earth on a parachute ready to be used again. So I need to build a trolley. Well, I found a reasonable sized bit of sprue......... ![]() ............ then trimmed it down at the edges. I kept the bits pointing inwards as they will help later. I`ve used a bit of Blu Tak to put the wheels in place and give you an idea of my idea. I may `shrink` the trolley as well later as it seems a little too big. ![]() And finally, while the pilot won`t be included in the finished build, I`ve put him in to give you an idea of scale.
|
![]() |
|
| Mark M | Feb 26 2011, 10:29 PM Post #4 |
|
Hawk T1
|
mad mad mad mad mad mad!!
|
![]() |
|
| madnursegaz | Feb 26 2011, 11:34 PM Post #5 |
|
resin fondler
|
Yes! Totally deranged! I love it!! |
![]() |
|
| tc2324 | Feb 27 2011, 11:10 PM Post #6 |
|
LCDR Tony `Banana's` Clay
|
Not to much done today. Put some primer on the fuselage then spent the rest of the time getting the launch dolley up and running. It`s about 75% complete now and I hope I`ve made it look reasonably lightwieght and cheap as per it`s task in launching the fighter and what the Germans might have gone for by this time in the `what if` extended war.![]()
|
![]() |
|
| Daz Greenwood | Feb 27 2011, 11:19 PM Post #7 |
|
The voices told me to do it!
|
Nice work. Those trolley wheels weren't taken from a downed P-38 by any chance? |
![]() |
|
| tc2324 | Feb 27 2011, 11:31 PM Post #8 |
|
LCDR Tony `Banana's` Clay
|
:lol: :lol: Your right of course, the wheels have come from the P-38 kit that I `butchered` to use in the XP-55 project, but on the XP-55 build I used the Meteors u/c so these were spare.
|
![]() |
|
| tc2324 | Mar 1 2011, 02:32 PM Post #9 |
|
LCDR Tony `Banana's` Clay
|
Got round to nearly finishing the launch dolley. Considering it was made of sprue, scrap plastic and spares, I`m happy with how it turned out. Two pics, one of the dolley itself, and note the housing at the rear for the parachute after it is jettisioned after launch. Second pic is of the aircraft sitting in place on the dolley. I have fitted the wings which came from a 1/72 Puccara kit, put in the filler and am obviously in the middle of getting them smoothed off. I also added four internal guns just for fun....... ![]() ![]() |
![]() |
|
| tc2324 | Mar 3 2011, 07:27 PM Post #10 |
|
LCDR Tony `Banana's` Clay
|
Been a bit busy lately so here`s a piccy update as to where I`m at so far.![]()
|
![]() |
|
| HawkFan | Mar 3 2011, 08:56 PM Post #11 |
![]()
Filler and Sander
|
Bloody hell thats good ..nice one
|
![]() |
|
| tc2324 | Mar 5 2011, 09:00 PM Post #12 |
|
LCDR Tony `Banana's` Clay
|
Cheers Jason. :) Got this one finished now with just a few minor kinks to iron out, then it`s on to the backstory and diorama pictures. So just to clarify what bits were used in this 1/48 scale kitbash model....., Cockpit interior 1. 1/72 Pucarra u/c leg for the joystick 2. 1/48 Meteor seat 3. 1/48 P-38 dashboard Airframe 1. 1/72 Fw 154 fuselage 2. 1/72 Pucarra outer wings 3. 1/72 Ju 87 elevators 4. Scratch built skid from sprue 5. Enlarged fuel tank from 1/72 Buccaneer bomb bay 6. Rocket exhaust from 1/72 Jet Provost Weapons 1. 1/72 Fw 190 machine guns 2. 1/48 P-38 rocket packs Launch Dolley 1. Scratch built main frame from sprue 2. Stabalizers made from 1/72 Lancaster engine parts 3. Wheels from 1/48 P-38 4. Booster rockets from 1/72 Harriers SNEB pods 5. Parachute housing from 1/72 Buccaneer bomb 6. Fitted parachute made from masking tape Think that pretty much covers it. First and second pictures are of the aircraft fitted on launch dolley and fully armed, while pictire three shows the aircraft after the mission and landed safely. Picture four shows the aircraft ready to be loaded onto a new dolley ready for the next mission. ![]() ![]() ![]()
|
![]() |
|
| Mark M | Mar 5 2011, 09:08 PM Post #13 |
|
Hawk T1
|
your MAD i say MAD |
![]() |
|
| Deleted User | Mar 5 2011, 09:16 PM Post #14 |
|
Deleted User
|
Ah, I can see what it is now. Another interesting build there tc
|
|
|
| 1 user reading this topic (1 Guest and 0 Anonymous) | |
| « Previous Topic · Work In Progress · Next Topic » |
























thats good 


2:53 PM Jul 11